Scaffold Plank Roll Forming Machine For UK & UAE
Main machine parameter
|1||Suitable Material||Galvanized Steel,Cold Roll Steel|
|3||Material Yield strength|
|4||Forming station||19 steps|
|11||Exit Rack||Unpower, One-units|
Decoiler→Leveling Device→Punching Machine→Guide Feeding→Roll
Forming System→Hydraulic Post Cutter →Exit Rack
1) Hydraulic Decoiler: one set
Hydraulic control steel coil inner bore shrinkage and stop Max Feeding width: 500mm,coil ID range:508mm±30mm Capacity: Max. 5 Ton.
2) Leveling Device
With feeding material guide, body frame made from H450 type steel
Side wall thickness:Q235 t20mm.
Shafts manufactured from 45# steel,Diameter=φ90mm,precision
3) Serve-Drive& Punching Machine
120tons HIGH SPEED punching machine before roll forming, equip with
Three sets of punching model.Punching machine four sides with
safety cover and one side with open the door.By PLC system
control.Material sending by the servo motor for punching more
accuracy, servo motor power 3 KW.
4) Main Machine
Body frame made from H450 type steel by welding.
Side wall thickness: Q235 t20mm.
Rollers manufactured from GCr15 Steel(=EN31 steel), precision
Shafts manufactured from 45# steel,Diameter=φ75/95mm,precision
machined,Quenching and tempering,Size-changing by spacer.
Gear/Sprocket driving, about 26-step to form.
Main Motor(Polaroid brand)=11KW+11KW , Frequency speed control.
Speed reducer motor:K series.
Production speed: 5-8m/min(including punching and cutting).
5) Hydraulic Post Cutter
Post to cut, stop to cutting,Three pieces type of cutting blade
design, no blanking.
Cutting tool material: Cr12MoV(= SKD11 with at least one million
times of cutting life), Heat treatment to HRC58-62 degree.
The cutting power is provided by the main engine hydraulic station.
6) PLC Control System
Control The Quantity And Cutting Length Automatically.
Input The Production Data(Production Batch,pcs,Length,etc.)On The
It Can Finish The Production Automatically.
Combined With: PLC, Inverter, Touch Screen, Encoder, etc.
7) Exit Rack
Un-powered, Two units,with rollers on it for easy movement
8) Product Show
Terms Of Trade
1. Minimum order quantity (MOQ): 1 Set.
2. Port of loading: port of Xiamen.
3. Type of payment: by T/T or by L/C.
4. Export:to more than 50 countries and regions, including Taiwan,
UK, France, Singapore, Greece, Australia, USA, Mexico, Brazil,
Chile, Bolivia, Trinidad, Israel, Saudi Arabia, etc.
Packing method: Main body of machine is naked and covered by
plastic film(to protect of dust and corrosion),loaded into
and steadily fixed in container suitable by steel rope and lock,
suitable for long-distance transportation.
1. The warranty is 24 months after the client receives the
machine.Within the 24 months, we will courier the replacement parts
to the client free of charge.
2. We offer technical support for the entire life of our machines.
3. We can send our technicians to install and train the workers in
the clients' factories with extra cost.